ns-3 RELEASE NOTES

This file contains ns-3 release notes (most recent releases first).

All of the ns-3 documentation is accessible from the ns-3 website: 

http://www.nsnam.org including tutorials: http://www.nsnam.org/tutorials.html

Release 3.6

===========

Availability

------------

This release is immediately available from:

http://www.nsnam.org/releases/ns-allinone-3.6.tar.bz2

Supported platforms

-------------------

ns-3.6 has been tested on the following platforms:

  - linux x86 gcc 4.2, 4.1, and, 3.4.6.

  - linux x86_64 gcc 4.4.0, 4.3.2, 4.2.3, 4.2.1, 4.1.3, 3.4.6

  - MacOS X ppc and x86 (gcc 4.0.x and 4.2.x)

  - cygwin gcc 3.4.4 (debug only), gcc 4.3.2 (debug and optimized)

  - mingw gcc 3.4.5 (debug only)

Not all ns-3 options are available on all platforms; consult the

wiki for more information:

http://www.nsnam.org/wiki/index.php/Installation

New user-visible features

-------------------------

  a) 802.11 models:

     - Add an implementation of the minstrel rate control algorithm 

       (Duy Nguyen for gsoc)

     - AthstatsHelper: enables the wifi device to produce periodic 

       reports similar to the ones generated by madwifi's

       athstats tool (Nicola Baldo)

     - 10MHz and 5MHz channel width supported by 802.11a model 

       (Ramon Bauza and Kirill Andreev)

     - Channel switching support. YansWifiPhy can now switch among 

       different channels (Ramon Bauza and Pavel Boyko)

  b) IPv6 models:

    - IPv6 interface;

    - IPv6 layer;

    - IPv6 raw socket;

    - Static IPv6 routing;

    - ICMPv6 layer;

    - Some ICMPv6 error messages (destination unreachable, ...);

    - Neighbor Discovery Protocol (NS/NA, RS/RA, redirection);

    - Ping6 application (send Echo request);

    - Radvd application (send RA);

    - Examples (ping6, simple-routing-ping6, radvd, radvd-two-prefix,

      icmpv6-redirect).

  c) Wireless Mesh Networking models:

    - General multi-interface mesh stack infrastructure (devices/mesh module).

    - IEEE 802.11s (Draft 3.0) model including Peering Management Protocol and HWMP.

    - Forwarding Layer for Meshing (FLAME) protocol.

  d) Nix-vector routing:  

    - Ipv4NixVectorHelper

    - Examples (nix-simple, nms-p2p-nix)

  e) New Test Framework

    - Use test.py instead of ./waf check or ./waf --regression

    - Previous unit tests have been ported to new framework.

    - Examples are tested for run-ability.

API changes from ns-3.5

-----------------------

API changes for this release are documented in the file CHANGES.html. 

XXX

Known issues

------------

ns-3 build is known to fail on the following platforms:

  - gcc 3.3 and earlier

  - optimized builds on gcc 3.4.4 and 3.4.5

  - optimized builds on linux x86 gcc 4.0.x

Future releases

---------------

XXX

Release 3.5

===========

Availability

------------

This release is immediately available from:

http://www.nsnam.org/releases/ns-allinone-3.5.tar.bz2

Supported platforms

-------------------

ns-3.5 has been tested on the following platforms:

  - linux x86 gcc 4.2, 4.1, and, 3.4.6.

  - linux x86_64 gcc 4.4.0, 4.3.2, 4.2.3, 4.2.1, 4.1.3, 3.4.6

  - MacOS X ppc and x86 (gcc 4.0.x and 4.2.x)

  - cygwin gcc 3.4.4 (debug only), gcc 4.3.2 (debug and optimized)

  - mingw gcc 3.4.5 (debug only)

Not all ns-3 options are available on all platforms; consult the

wiki for more information:

http://www.nsnam.org/wiki/index.php/Installation

New user-visible features

-------------------------

  a) 802.11 MAC:

     - EDCA multi-qos-class support (Mirko Banchi)

     - 802.11n initial support for A-MSDU frame aggregation (Mirko Banchi)

     - aarf-cd and cara rate control algorithms (Federico Maguolo)

  b) 802.11 PHY:

     - 802.11b PHY support (Gary Pei)

     - Nakagami propagation loss model (Timo Bingmann)

     - radiotap and prism headers for PCAP output (Nicola Baldo)

  c) RandomVariable:

     - GammaVariable and ErlangVariable (Timo Bingmann)

     - ZipfVariable (Francesco Malandrino)

  d) UdpEcho: allows setting the payload of echo packets

  e) Ipv4/Ipv4RoutingProtocol: allow fine-grained control over

     routing policy and arbitrary composition of routing protocols

API changes from ns-3.4

-----------------------

API changes for this release are documented in the file CHANGES.html.  The

internal API and composition of the IPv4 stack underwent significant

refactoring in this release cycle.

Known issues

------------

ns-3 build is known to fail on the following platforms:

  - gcc 3.3 and earlier

  - optimized builds on gcc 3.4.4 and 3.4.5

  - optimized builds on linux x86 gcc 4.0.x

Future releases

---------------

Our next release, which is expected to happen in 2 to 4 months from now, will

feature the merging of some of our projects currently in development including

fuller IPv6 support, some smaller features such as a new Global ARP 

package, and possibly a new Testing and Validation suite.

Release 3.4

===========

Availability

------------

This release is immediately available from:

http://www.nsnam.org/releases/ns-allinone-3.4.tar.bz2

Supported platforms

-------------------

ns-3.4 has been tested on the following platforms:

  - linux x86 gcc 4.2, 4.1, and, 3.4.6.

  - linux x86_64 gcc 4.3.2, 4.2.3, 4.2.1, 4.1.3, 3.4.6

  - MacOS X ppc and x86

  - cygwin gcc 3.4.4 (debug only)

Not all ns-3 options are available on all platforms; consult the

wiki for more information:

http://www.nsnam.org/wiki/index.php/Installation

New user-visible features

-------------------------

  a) Wifi models: Timo Bingman contributed a ThreeLogDistance and a Nakagami

     propagation loss model based on the ns-2 models. Fabian Mauchle contributed

     multicast support.

  b) Object Name Service:  A facility allowing ns-3 Objects to be assigned

     names has been added.

  c) Tap Bridge:  A second option for integrating ns-3 with real-world hosts

     has been added.  This allows for real hosts to talk over ns-3 net devices

     and simulated networks.

  d) A new build option (ns-3-allinone) has been provided to make it easier for

     users to download and bulid commonly used ns-3 configurations.

  e) The ns-3 calendar queue scheduler has been ported to ns-3.

  f) XML support has been added to the ConfigStore.

API changes from ns-3.3

-----------------------

API changes for this release are documented in the file CHANGES.html

Known issues

------------

ns-3 build is known to fail on the following platforms:

  - gcc 3.3 and earlier

  - optimized builds on gcc 3.4.4 and 3.4.5

  - optimized builds on linux x86 gcc 4.0.x

  - optimized builds on Ubuntu 8.10 alpha 5 x86 gcc4.3.2

  - MinGW

The IPv4 API defined in src/node/ipv4.h is expected to undergo major changes 

in preparation of the merge of the IPv6 API and implementation.

Future releases

---------------

Our next release, which is expected to happen in 2 to 4 months from now, will

feature the merging of some of our projects currently in development including

fuller IPv6 support, and IPv4 and routing protocol refactoring, and some smaller

features such as a new Global ARP package and possibly a new Testing and Validation

suite,

Release 3.3

===========

Availability

------------

This release is immediately available from:

http://www.nsnam.org/releases/ns-3.3.tar.bz2

Supported platforms

-------------------

ns-3.3 has been tested on the following platforms:

  - linux x86 gcc 4.2, 4.1, and, 3.4.6.

  - linux x86_64 gcc 4.3.2, 4.2.3, 4.2.1, 4.1.3, 3.4.6

  - MacOS X ppc and x86

  - cygwin gcc 3.4.4 (debug only)

Not all ns-3 options are available on all platforms; consult the

wiki for more information:

http://www.nsnam.org/wiki/index.php/Installation

New user-visible features

-------------------------

  a) Emulated Net Device

     A new net device has been added as enabling technology for ns-3 emulation

     scenarios.  See src/devices/emu and examples/emu-udp-echo.cc for details.

  b) ICMP Support

     Support for several ICMP messages has been added to ns-3.  See 

     src/internet-stack/icmpv4.h for details.

  c) IPv6 Address Support

     New clases to support IPv6 addresses has been added to the system.  This

     is enabling technology for fuller IPv6 support scheduled for ns-3.4.

  d) A flow-id tag has been added to the contributed code section

  e) Star topologies can be created from the topology helper functions

  f) The global routing code has been made dynamic (not just limited to

     (pre-simulation computation) and supports stub network interfaces and 

     bridge net devices 

  g) A MatchContainer has been added to the configuration subsystem

API changes from ns-3.2

-----------------------

API changes for this release are documented in the file CHANGES.html

Known issues

------------

ns-3 build is known to fail on the following platforms:

  - gcc 3.3 and earlier

  - optimized builds on gcc 3.4.4 and 3.4.5

  - optimized builds on linux x86 gcc 4.0.x

  - optimized builds on Ubuntu 8.10 alpha 5 x86 gcc4.3.2

  - MinGW

The IPv4 API defined in src/node/ipv4.h is expected to undergo major changes 

in preparation of the merge of the IPv6 API and implementation.

Future releases

---------------

Our next release, which is expected to happen in 2 to 4 months from now, will

feature the merging of some of our projects currently in development including

fuller IPv6 support, and IPv4 and routing protocol refactoring, and some smaller

features such as an object naming facility and a new Global ARP package.

Release 3.2

===========

Availability

------------

This release is immediately available from:

http://www.nsnam.org/releases/ns-3.2.tar.bz2

Supported platforms

-------------------

ns-3.2 has been tested on the following platforms:

  - linux x86 gcc 4.2, 4.1, and, 3.4.6.

  - linux x86_64 gcc 4.3.2, 4.2.3, 4.2.1, 4.1.3, 3.4.6

  - MacOS X ppc and x86

  - cygwin gcc 3.4.4 (debug only)

Not all ns-3 options are available on all platforms; consult the

wiki for more information:

http://www.nsnam.org/wiki/index.php/Installation

New user-visible features

-------------------------

  a) Learning bridge (IEEE 802.1D)

    It is now possible to bridge together multiple layer 2 devices to

    create larger layer 2 networks. The Wifi and Csma models support

    this new mode of operation. (contributed by Gustavo Carneiro)

  b) Python bindings

    It is now possible to write simulation scripts in python using our 

    python bindings (contributed by Gustavo Carneiro).

  c) Real-time simulator

    It is now possible to run simulations synchronized on the real-world

    wall-clock time (contributed by Craig Dowell).

  d) Network Simulation Cradle

    It is now possible to use the Network Simulation Cradle 

    (http://www.wand.net.nz/~stj2/nsc/) in ns-3 and run simulations 

    using various versions of kernel TCP network stacks. (contributed

    by Florian Westphal as part of his Google Summer of Code work)

  e) A statistics framework

    Joseph Kopena contributed a statistics framework which can be used

    keep track of simulation data in persistent storage across multiple 

    runs (database and ascii file backends are available).

    More information on the wiki:

    http://www.nsnam.org/wiki/index.php/Statistical_Framework_for_Network_Simulation

API changes from ns-3.1

-----------------------

API changes for this release are documented in the file CHANGES.html

Known issues

------------

ns-3 build is known to fail on the following platforms:

  - gcc 3.3 and earlier

  - optimized builds on gcc 3.4.4 and 3.4.5

  - optimized builds on linux x86 gcc 4.0.x

  - optimized builds on Ubuntu 8.10 alpha 5 x86 gcc4.3.2

  - MinGW

The IPv4 API defined in src/node/ipv4.h is expected to undergo major changes 

in preparation of the merge of the IPv6 API and implementation.

Future releases

---------------

Our next release, which is expected to happen in 2 to 4 months from now, will

feature the merging of some of our projects currently in development: IPv6, 

emulation, and synchronous posix sockets.

Release 3.1 (2008/06/30)

========================

The first ns-3 stable release

-----------------------------

This release is immediately available from:

http://www.nsnam.org/releases/ns-3.1.tar.bz2

We dedicate this initial ns-3 release to our late contributor and friend, 

Federico Maguolo.

What is ns-3 ?

--------------

ns-3 is a new discrete-event network simulator designed for supporting network

research and education. ns-3 features a solid, well documented C++ core and 

models for TCP/IP (IPv4), several link types including WiFi, and mobility 

models.

ns-3 is an open source project released under the GNU GPLv2 license which 

allows anyone to use ns-3 without having to pay any license fee or royalties. 

ns-3 is actively seeking new contributors to extend the range of supported 

models and/or to maintain existing models.

Where to get more information about ns-3

----------------------------------------

All the ns-3 documentation, is accessible from the ns-3 website: 

http://www.nsnam.org

Including, tutorials:

http://www.nsnam.org/tutorials.html

Supported platforms

-------------------

ns-3 is regularly tested on the following platforms:

  - linux x86 gcc 4.2, 4.1, and, 3.4.6.

  - linux x86_64 gcc 4.1.3, 4.2.1, 3.4.6

  - MacOS X ppc and x86

  - cygwin gcc 3.4.4 (debug only)

Known issues

------------

ns-3 is known to fail on the following platforms:

  - gcc 3.3 and earlier

  - optimized builds on gcc 3.4.4 and 3.4.5

  - optimized builds on linux x86 gcc 4.0.x

The IPv4 API defined in src/node/ipv4.h is expected to undergo major changes 

in preparation of the merge of the IPv6 API and implementation.

Future releases

---------------

Our next release, which is expected to happen in 2 to 4 months from now, will

feature the merging of some of our projects currently in development: python 

scripting, IPv6, emulation, a statistics framework and synchronous posix 

sockets.

Release 3.0.13 (2008/06/02)

===========================

- point to point links generate ppp pcap traces

- point to point links support asymmetrical data rates.

- generate doxygen documentation for all attributes and trace sources

- add ConfigStore and GtkConfigStore to contrib module

- socket API now support tx and rx buffers: implemented for UDP and TCP

- ARP cache now supports per-entry pending queues

- lots of bugfixes and implementation and API cleanups

Warning: among API changes in this release, Application::Start and 

Application::Stop now interprets the time argument as a relative

instead of absolute simulation time, to align with how Simulator::Schedule

behaves.  Any code that calls these APIs in the middle of the simulation 

will need to be adapted.  

The API of Simulator::StopAt (time) has also changed.  Now it is 

called Simulator::Stop (time), and takes a relative time, instead of 

absolute.

Release 3.0.12 (2008/04/07)

===========================

    - Add Attribute support to the TypeId metadata system and add

attribute support to all in-tree models

    - Add a mid-level helper API to build simulation topologies 

and perform simple ascii and pcap link-level tracing.

    - Large amount of structural changes to accomodate the needs

of the upcoming python bindings

    - new rate control algorithm (RRAA) and a jakes propagation model

in the 802.11 model (Federico Maguolo).

    - regression test framework added

    - TCP delayed acknowledgements and multitasking server

Release 3.0.11 (2008/02/15)

===========================

    - Initial port of GTNetS TCP implementation (initial version 

that does not support multitasking or delayed acknowledgments yet, 

but supports a reliable stream service)

    - Changes to the ns-3 object model to create a TypeId-based 

metadata system

    - lots of bug fixes throughout the system

    - tutorial updates

Release 3.0.10 (2008/01/15)

===========================

   - Add tutorial document content;

   - Valgrind option for "waf" tool;

   - Doxygen organization changes.

Release 3.0.9 (2007/12/15)

==========================

   - A 802.11 model ported from Yans. This model supports:

       * a rather extensive PHY model

       * log-distance and friis propagation model

       * a simple set of rate control algorithms (ARF, Ideal, 

         AARF, constant-rate)

       * adhoc and infrastructure mode (beacon+assoc)

   - Use smart pointer for Packet in the APIs

   - A new contrib directory with helper classes: 

     EventGarbageCollector, Gnuplot

   - Tracing support for Applications

   - many bugs fixed

Release 3.0.8 (2007/11/15)

==========================

   - A simple error model

   - Source files for ns-3 tutorial

Release 3.0.7 (2007/10/15)

==========================

  - OLSR routing protocol

  - A timer class

  - Additional mobility models (random waypoint, random 2D walk)

  - A mobility visualization tool 

Release 3.0.6 (2007/09/15)

==========================