The 'everything.h' header file is only used for Python bindings and should be generated into bindings/python/, not ns3/.
/* -*- Mode:C++; c-file-style:"gnu"; indent-tabs-mode:nil; -*- */
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
//
// Network topology
//
// 10Mb/s, 10ms 10Mb/s, 10ms
// n0-----------------n1-----------------n2
//
//
// - CBR traffic for 1000 seconds
// - Tracing of queues and packet receptions to file
// "tcp-large-transfer.tr"
// - pcap traces also generated in the following files
// "tcp-large-transfer-$n-$i.pcap" where n and i represent node and interface
// numbers respectively
// Usage (e.g.): ./waf --run tcp-large-transfer
#include <ctype.h>
#include <iostream>
#include <fstream>
#include <string>
#include <cassert>
#include "ns3/core-module.h"
#include "ns3/common-module.h"
#include "ns3/helper-module.h"
#include "ns3/node-module.h"
#include "ns3/global-route-manager.h"
#include "ns3/simulator-module.h"
using namespace ns3;
NS_LOG_COMPONENT_DEFINE ("TcpErrors");
int main (int argc, char *argv[])
{
// Users may find it convenient to turn on explicit debugging
// for selected modules; the below lines suggest how to do this
// LogComponentEnable("TcpL4Protocol", LOG_LEVEL_ALL);
// LogComponentEnable("TcpSocketImpl", LOG_LEVEL_ALL);
// LogComponentEnable("PacketSink", LOG_LEVEL_ALL);
// LogComponentEnable("TcpErrors", LOG_LEVEL_ALL);
//
// Make the random number generators generate reproducible results.
//
RandomVariable::UseGlobalSeed (1, 1, 2, 3, 5, 8);
// Allow the user to override any of the defaults and the above
// Bind()s at run-time, via command-line arguments
CommandLine cmd;
cmd.Parse (argc, argv);
// Here, we will explicitly create three nodes. The first container contains
// nodes 0 and 1 from the diagram above, and the second one contains nodes
// 1 and 2. This reflects the channel connectivity, and will be used to
// install the network interfaces and connect them with a channel.
NodeContainer n0n1;
n0n1.Create (2);
NodeContainer n1n2;
n1n2.Add (n0n1.Get (1));
n1n2.Create (1);
// We create the channels first without any IP addressing information
// First make and configure the helper, so that it will put the appropriate
// parameters on the network interfaces and channels we are about to install.
PointToPointHelper p2p;
p2p.SetDeviceAttribute ("DataRate", DataRateValue (DataRate(10000000)));
p2p.SetChannelAttribute ("Delay", TimeValue (MilliSeconds(10)));
// And then install devices and channels connecting our topology.
NetDeviceContainer d0d1 = p2p.Install (n0n1);
NetDeviceContainer d1d2 = p2p.Install (n1n2);
// Now add ip/tcp stack to all nodes.
NodeContainer allNodes = NodeContainer (n0n1, n1n2.Get (1));
InternetStackHelper internet;
internet.Install (allNodes);
// Later, we add IP addresses.
Ipv4AddressHelper ipv4;
ipv4.SetBase ("10.1.3.0", "255.255.255.0");
Ipv4InterfaceContainer i0i1 = ipv4.Assign (d0d1);
ipv4.SetBase ("10.1.2.0", "255.255.255.0");
Ipv4InterfaceContainer i1i2 = ipv4.Assign (d1d2);
// and setup ip routing tables to get total ip-level connectivity.
GlobalRouteManager::PopulateRoutingTables ();
// Set up the sending CBR application
uint16_t servPort = 50000;
Address remoteAddress(InetSocketAddress(i1i2.GetAddress (1), servPort));
OnOffHelper clientHelper ("ns3::TcpSocketFactory", remoteAddress);
clientHelper.SetAttribute
("OnTime", RandomVariableValue (ConstantVariable (1)));
clientHelper.SetAttribute
("OffTime", RandomVariableValue (ConstantVariable (0)));
ApplicationContainer clientApp = clientHelper.Install(n0n1.Get(0));
clientApp.Start (Seconds (1.0));
clientApp.Stop (Seconds (10.0));
// Create a packet sink to receive at n2
PacketSinkHelper sinkHelper ("ns3::TcpSocketFactory",
InetSocketAddress (Ipv4Address::GetAny (), servPort));
ApplicationContainer sinkApp = sinkHelper.Install (n1n2.Get(1));
sinkApp.Start (Seconds (1.0));
sinkApp.Stop (Seconds (10.0));
// We're going to model a lossy channel
RandomVariableValue u01(UniformVariable (0.0, 1.0));
DoubleValue rate(0.001);
Ptr<RateErrorModel> em1 =
CreateObject<RateErrorModel> ("RanVar", u01, "ErrorRate", rate);
Ptr<RateErrorModel> em2 =
CreateObject<RateErrorModel> ("RanVar", u01, "ErrorRate", rate);
//put error models on both netdevices of the router nodes so that there is
//loss of both data and acks
d0d1.Get(1)->SetAttribute("ReceiveErrorModel", PointerValue (em1));
d1d2.Get(0)->SetAttribute("ReceiveErrorModel", PointerValue (em2));
//Ask for ASCII and pcap traces of network traffic
std::ofstream ascii;
ascii.open ("tcp-errors.tr");
PointToPointHelper::EnableAsciiAll (ascii);
PointToPointHelper::EnablePcapAll ("tcp-errors");
// Finally, set up the simulator to run for 1000 seconds.
Simulator::Stop (Seconds(1000));
Simulator::Run ();
Simulator::Destroy ();
}