/* -*-  Mode: C++; c-file-style: "gnu"; indent-tabs-mode:nil; -*- */

/*

 * Copyright (c) 2005,2006 INRIA

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as 

 * published by the Free Software Foundation;

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, write to the Free Software

 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

 *

 * Author: Mathieu Lacage <mathieu.lacage@sophia.inria.fr>

 */

#ifndef WIFI_PHY_H

#define WIFI_PHY_H

#include <stdint.h>

#include "ns3/callback.h"

#include "ns3/packet.h"

#include "ns3/object.h"

#include "ns3/nstime.h"

#include "ns3/ptr.h"

#include "wifi-mode.h"

#include "wifi-preamble.h"

#include "wifi-phy-standard.h"

#include "ns3/traced-callback.h"

namespace ns3 {

class WifiChannel;

class NetDevice;

/**

 * \brief receive notifications about phy events.

 */

class WifiPhyListener {

public:

  virtual ~WifiPhyListener ();

  /**

   * \param duration the expected duration of the packet reception.

   *

   * We have received the first bit of a packet. We decided

   * that we could synchronize on this packet. It does not mean

   * we will be able to successfully receive completely the

   * whole packet. It means that we will report a BUSY status until

   * one of the following happens:

   *   - NotifyRxEndOk

   *   - NotifyExEndError

   *   - NotifyTxStart

   */

  virtual void NotifyRxStart (Time duration) = 0;

  /**

   * We have received the last bit of a packet for which

   * NotifyRxStart was invoked first and, the packet has

   * been successfully received.

   */

  virtual void NotifyRxEndOk (void) = 0;  

  /**

   * We have received the last bit of a packet for which

   * NotifyRxStart was invoked first and, the packet has

   * _not_ been successfully received.

   */

  virtual void NotifyRxEndError (void) = 0;

  /**

   * \param duration the expected transmission duration.

   *

   * We are about to send the first bit of the packet.

   * We do not send any event to notify the end of 

   * transmission. Listeners should assume that the

   * channel implicitely reverts to the idle state

   * unless they have received a cca busy report.

   */

  virtual void NotifyTxStart (Time duration) = 0;

  /**

   * \param duration the expected busy duration.

   *

   * This method does not really report a real state

   * change as opposed to the other methods in this class.

   * It merely reports that, unless the medium is reported

   * busy through NotifyTxStart or NotifyRxStart/End, 

   * it will be busy as defined by the currently selected 

   * CCA mode.

   *

   * Typical client code which wants to have a clear picture

   * of the CCA state will need to keep track of the time at

   * which the last NotifyCcaBusyStart method is called and

   * what duration it reported.

   */

  virtual void NotifyMaybeCcaBusyStart (Time duration) = 0;

  /**

   * \param duration the expected channel switching duration.

   *

   * We do not send any event to notify the end of 

   * channel switching. Listeners should assume that the

   * channel implicitely reverts to the idle or busy states.

   */

  virtual void NotifySwitchingStart (Time duration) = 0; 

};

/**

 * \brief 802.11 PHY layer model

 *

 */

class WifiPhy : public Object

{

public:

  /**

   * The state of the PHY layer.

   */

  enum State {

    /**

     * The PHY layer is IDLE.

     */

    IDLE,

    /**

     * The PHY layer has sense the medium busy through the CCA mechanism

     */

    CCA_BUSY,

    /**

     * The PHY layer is sending a packet.

     */

    TX,

    /**

     * The PHY layer is receiving a packet.

     */

    RX,

    /**

     * The PHY layer is switching to other channel.

     */

    SWITCHING

  };

  /**

   * arg1: packet received successfully

   * arg2: snr of packet

   * arg3: mode of packet

   * arg4: type of preamble used for packet.

   */

  typedef Callback<void,Ptr<Packet>, double, WifiMode, enum WifiPreamble> RxOkCallback;

  /**

   * arg1: packet received unsuccessfully

   * arg2: snr of packet

   */

  typedef Callback<void,Ptr<const Packet>, double> RxErrorCallback;

  static TypeId GetTypeId (void);

  WifiPhy ();

  virtual ~WifiPhy ();

  virtual double GetTxPowerStart (void) const = 0;

  virtual double GetTxPowerEnd (void) const = 0;

  /**

   * \returns the number of tx power levels available for this PHY.

   */

  virtual uint32_t GetNTxPower (void) const = 0;

  /**

   * \param callback the callback to invoke

   *        upon successful packet reception.

   */

  virtual void SetReceiveOkCallback (RxOkCallback callback) = 0;

  /**

   * \param callback the callback to invoke

   *        upon erroneous packet reception.

   */

  virtual void SetReceiveErrorCallback (RxErrorCallback callback) = 0;

  /**

   * \param packet the packet to send

   * \param mode the transmission mode to use to send this packet

   * \param preamble the type of preamble to use to send this packet.

   * \param txPowerLevel a power level to use to send this packet. The real

   *        transmission power is calculated as txPowerMin + txPowerLevel * (txPowerMax - txPowerMin) / nTxLevels

   */

  virtual void SendPacket (Ptr<const Packet> packet, WifiMode mode, enum WifiPreamble preamble, uint8_t txPowerLevel) = 0;

  /**

   * \param listener the new listener

   *

   * Add the input listener to the list of objects to be notified of

   * PHY-level events.

   */

  virtual void RegisterListener (WifiPhyListener *listener) = 0;

  /**

   * \returns true of the current state of the PHY layer is WifiPhy::IDLE, false otherwise.

   */

  virtual bool IsStateIdle (void) = 0;

  /**

   * \returns true of the current state of the PHY layer is WifiPhy::CCA_BUSY, false otherwise.

   */

  virtual bool IsStateCcaBusy (void) = 0;

  /**

   * \returns true of the current state of the PHY layer is not WifiPhy::IDLE, false otherwise.

   */

  virtual bool IsStateBusy (void) = 0;

  /**

   * \returns true of the current state of the PHY layer is WifiPhy::RX, false otherwise.

   */

  virtual bool IsStateRx (void) = 0;

  /**

   * \returns true of the current state of the PHY layer is WifiPhy::TX, false otherwise.

   */

  virtual bool IsStateTx (void) = 0;

  /**

   * \returns true of the current state of the PHY layer is WifiPhy::SWITCHING, false otherwise.

   */

  virtual bool IsStateSwitching (void) = 0;

  /**

   * \returns the amount of time since the current state has started.

   */

  virtual Time GetStateDuration (void) = 0;

  /**

   * \returns the predicted delay until this PHY can become WifiPhy::IDLE.

   *

   * The PHY will never become WifiPhy::IDLE _before_ the delay returned by

   * this method but it could become really idle later.

   */

  virtual Time GetDelayUntilIdle (void) = 0;

  virtual Time GetLastRxStartTime (void) const = 0;

  /**

   * \param size the number of bytes in the packet to send

   * \param payloadMode the transmission mode to use for this packet

   * \param preamble the type of preamble to use for this packet.

   * \returns the total amount of time this PHY will stay busy for

   *          the transmission of these bytes.

   */

  virtual Time CalculateTxDuration (uint32_t size, WifiMode payloadMode, enum WifiPreamble preamble) const = 0;

  /**

   * The WifiPhy::GetNModes() and WifiPhy::GetMode() methods are used

   * (e.g., by a WifiRemoteStationManager) to determine the set of

   * transmission/reception modes that this WifiPhy(-derived class)

   * can support - a set of WifiMode objects which we call the

   * DeviceRateSet, and which is stored as WifiPhy::m_deviceRateSet.

   *

   * It is important to note that the DeviceRateSet is a superset (not

   * necessarily proper) of the OperationalRateSet (which is

   * logically, if not actually, a property of the associated

   * WifiRemoteStationManager), which itself is a superset (again, not

   * necessarily proper) of the BSSBasicRateSet.

   *

   * \returns the number of transmission modes supported by this PHY.

   *

   * \sa WifiPhy::GetMode()

   */

  virtual uint32_t GetNModes (void) const = 0;

  /**

   * The WifiPhy::GetNModes() and WifiPhy::GetMode() methods are used

   * (e.g., by a WifiRemoteStationManager) to determine the set of

   * transmission/reception modes that this WifiPhy(-derived class)

   * can support - a set of WifiMode objects which we call the

   * DeviceRateSet, and which is stored as WifiPhy::m_deviceRateSet.

   *

   * It is important to note that the DeviceRateSet is a superset (not

   * necessarily proper) of the OperationalRateSet (which is

   * logically, if not actually, a property of the associated

   * WifiRemoteStationManager), which itself is a superset (again, not

   * necessarily proper) of the BSSBasicRateSet.

   *

   * \param mode index in array of supported modes

   * \returns the mode whose index is specified.

   *

   * \sa WifiPhy::GetNModes()

   */

  virtual WifiMode GetMode (uint32_t mode) const = 0;

  /**

   * \param txMode the transmission mode

   * \param ber the probability of bit error rate

   * \returns the minimum snr which is required to achieve

   *          the requested ber for the specified transmission mode. (W/W)

   */

  virtual double CalculateSnr (WifiMode txMode, double ber) const = 0;

  /** 

   * \brief Set channel number. 

   * 

   * Channel center frequency = Channel starting frequency + 5 MHz * (nch - 1)

   *

   * where Starting channel frequency is standard-dependent, see SetStandard()

   * as defined in IEEE 802.11-2007 17.3.8.3.2.

   */ 

  virtual void SetChannelNumber (uint16_t id) = 0;

  /// Return current channel number, see SetChannelNumber()

  virtual uint16_t GetChannelNumber () const = 0;

  virtual void ConfigureStandard (enum WifiPhyStandard standard) = 0;

  virtual Ptr<WifiChannel> GetChannel (void) const = 0;

  static WifiMode GetDsssRate1Mbps ();

  static WifiMode GetDsssRate2Mbps ();

  static WifiMode GetDsssRate5_5Mbps ();

  static WifiMode GetDsssRate11Mbps ();

  static WifiMode GetErpOfdmRate6Mbps ();

  static WifiMode GetErpOfdmRate9Mbps ();

  static WifiMode GetErpOfdmRate12Mbps ();

  static WifiMode GetErpOfdmRate18Mbps ();

  static WifiMode GetErpOfdmRate24Mbps ();

  static WifiMode GetErpOfdmRate36Mbps ();

  static WifiMode GetErpOfdmRate48Mbps ();

  static WifiMode GetErpOfdmRate54Mbps ();

  static WifiMode GetOfdmRate6Mbps ();

  static WifiMode GetOfdmRate9Mbps ();

  static WifiMode GetOfdmRate12Mbps ();

  static WifiMode GetOfdmRate18Mbps ();

  static WifiMode GetOfdmRate24Mbps ();

  static WifiMode GetOfdmRate36Mbps ();

  static WifiMode GetOfdmRate48Mbps ();

  static WifiMode GetOfdmRate54Mbps ();

  static WifiMode GetOfdmRate3MbpsBW10MHz ();

  static WifiMode GetOfdmRate4_5MbpsBW10MHz ();

  static WifiMode GetOfdmRate6MbpsBW10MHz ();

  static WifiMode GetOfdmRate9MbpsBW10MHz ();

  static WifiMode GetOfdmRate12MbpsBW10MHz ();

  static WifiMode GetOfdmRate18MbpsBW10MHz ();

  static WifiMode GetOfdmRate24MbpsBW10MHz ();

  static WifiMode GetOfdmRate27MbpsBW10MHz ();

  static WifiMode GetOfdmRate1_5MbpsBW5MHz ();

  static WifiMode GetOfdmRate2_25MbpsBW5MHz ();

  static WifiMode GetOfdmRate3MbpsBW5MHz ();

  static WifiMode GetOfdmRate4_5MbpsBW5MHz ();

  static WifiMode GetOfdmRate6MbpsBW5MHz ();

  static WifiMode GetOfdmRate9MbpsBW5MHz ();

  static WifiMode GetOfdmRate12MbpsBW5MHz ();

  static WifiMode GetOfdmRate13_5MbpsBW5MHz ();

  /**

   * Public method used to fire a PhyTxBegin trace.  Implemented for encapsulation 

   * purposes.

   */

  void NotifyTxBegin (Ptr<const Packet> packet);

  /**

   * Public method used to fire a PhyTxEnd trace.  Implemented for encapsulation 

   * purposes.

   */

  void NotifyTxEnd (Ptr<const Packet> packet);

  /**

   * Public method used to fire a PhyTxDrop trace.  Implemented for encapsulation 

   * purposes.

   */

  void NotifyTxDrop (Ptr<const Packet> packet);

  /**

   * Public method used to fire a PhyRxBegin trace.  Implemented for encapsulation 

   * purposes.

   */

  void NotifyRxBegin (Ptr<const Packet> packet);

  /**

   * Public method used to fire a PhyRxEnd trace.  Implemented for encapsulation 

   * purposes.

   */

  void NotifyRxEnd (Ptr<const Packet> packet);

  /**

   * Public method used to fire a PhyRxDrop trace.  Implemented for encapsulation 

   * purposes.

   */

  void NotifyRxDrop (Ptr<const Packet> packet);

  /** 

   * 

   * Public method used to fire a PromiscSniffer trace for a wifi packet being received.  Implemented for encapsulation 

   * purposes.

   * 

   * @param packet the packet being received

   * @param channelFreqMhz the frequency in MHz at which the packet is

   * received. Note that in real devices this is normally the

   * frequency to which  the receiver is tuned, and this can be

   * different than the frequency at which the packet was originally

   * transmitted. This is because it is possible to have the receiver

   * tuned on a given channel and still to be able to receive packets

   * on a nearby channel.

   * @param channelNumber the channel on which the packet is received

   * @param rate the PHY data rate in units of 500kbps (i.e., the same

   * units used both for the radiotap and for the prism header) 

   * @param isShortPreamble true if short preamble is used, false otherwise

   * @param signalDbm signal power in dBm

   * @param noiseDbm  noise power in dBm

   */

  void NotifyPromiscSniffRx (Ptr<const Packet> packet, uint16_t channelFreqMhz, uint16_t channelNumber, uint32_t rate, bool isShortPreamble, 

                             double signalDbm, double noiseDbm);

  /** 

   * 

   * Public method used to fire a PromiscSniffer trace for a wifi packet being transmitted.  Implemented for encapsulation 

   * purposes.

   * 

   * @param packet the packet being transmitted

   * @param channelFreqMhz the frequency in MHz at which the packet is

   * transmitted. 

   * @param channelNumber the channel on which the packet is transmitted

   * @param rate the PHY data rate in units of 500kbps (i.e., the same

   * units used both for the radiotap and for the prism header) 

   * @param isShortPreamble true if short preamble is used, false otherwise

   */

  void NotifyPromiscSniffTx (Ptr<const Packet> packet, uint16_t channelFreqMhz, uint16_t channelNumber, uint32_t rate, bool isShortPreamble);

private:

  /**

   * The trace source fired when a packet begins the transmission process on

   * the medium.

   *

   * \see class CallBackTraceSource

   */

  TracedCallback<Ptr<const Packet> > m_phyTxBeginTrace;

  /**

   * The trace source fired when a packet ends the transmission process on

   * the medium.

   *

   * \see class CallBackTraceSource

   */

  TracedCallback<Ptr<const Packet> > m_phyTxEndTrace;

  /**

   * The trace source fired when the phy layer drops a packet as it tries

   * to transmit it.

   *

   * \see class CallBackTraceSource

   */

  TracedCallback<Ptr<const Packet> > m_phyTxDropTrace;

  /**

   * The trace source fired when a packet begins the reception process from

   * the medium.

   *

   * \see class CallBackTraceSource

   */

  TracedCallback<Ptr<const Packet> > m_phyRxBeginTrace;

  /**

   * The trace source fired when a packet ends the reception process from

   * the medium.

   *

   * \see class CallBackTraceSource

   */

  TracedCallback<Ptr<const Packet> > m_phyRxEndTrace;

  /**

   * The trace source fired when the phy layer drops a packet it has received.

   *

   * \see class CallBackTraceSource

   */

  TracedCallback<Ptr<const Packet> > m_phyRxDropTrace;

  /**

   * A trace source that emulates a wifi device in monitor mode

   * sniffing a packet being received. 

   * 

   * As a reference with the real world, firing this trace

   * corresponds in the madwifi driver to calling the function

   * ieee80211_input_monitor()

   *

   * \see class CallBackTraceSource

   */

  TracedCallback<Ptr<const Packet>, uint16_t, uint16_t, uint32_t, bool, double, double> m_phyPromiscSniffRxTrace;

  /**

   * A trace source that emulates a wifi device in monitor mode

   * sniffing a packet being transmitted. 

   * 

   * As a reference with the real world, firing this trace

   * corresponds in the madwifi driver to calling the function

   * ieee80211_input_monitor()

   *

   * \see class CallBackTraceSource

   */

  TracedCallback<Ptr<const Packet>, uint16_t, uint16_t, uint32_t, bool> m_phyPromiscSniffTxTrace;