--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/include/linux/mc146818rtc.h	Sun Jan 11 20:20:11 2009 +0100
@@ -0,0 +1,119 @@
+/* mc146818rtc.h - register definitions for the Real-Time-Clock / CMOS RAM
+ * Copyright Torsten Duwe <duwe@informatik.uni-erlangen.de> 1993
+ * derived from Data Sheet, Copyright Motorola 1984 (!).
+ * It was written to be part of the Linux operating system.
+ */
+/* permission is hereby granted to copy, modify and redistribute this code
+ * in terms of the GNU Library General Public License, Version 2 or later,
+ * at your option.
+ */
+
+#ifndef _MC146818RTC_H
+#define _MC146818RTC_H
+
+#include <asm/io.h>
+#include <linux/rtc.h>			/* get the user-level API */
+#include <asm/mc146818rtc.h>		/* register access macros */
+
+#ifdef __KERNEL__
+#include <linux/spinlock.h>		/* spinlock_t */
+extern spinlock_t rtc_lock;		/* serialize CMOS RAM access */
+
+/* Some RTCs extend the mc146818 register set to support alarms of more
+ * than 24 hours in the future; or dates that include a century code.
+ * This platform_data structure can pass this information to the driver.
+ *
+ * Also, some platforms need suspend()/resume() hooks to kick in special
+ * handling of wake alarms, e.g. activating ACPI BIOS hooks or setting up
+ * a separate wakeup alarm used by some almost-clone chips.
+ */
+struct cmos_rtc_board_info {
+	void	(*wake_on)(struct device *dev);
+	void	(*wake_off)(struct device *dev);
+
+	u8	rtc_day_alarm;		/* zero, or register index */
+	u8	rtc_mon_alarm;		/* zero, or register index */
+	u8	rtc_century;		/* zero, or register index */
+};
+#endif
+
+/**********************************************************************
+ * register summary
+ **********************************************************************/
+#define RTC_SECONDS		0
+#define RTC_SECONDS_ALARM	1
+#define RTC_MINUTES		2
+#define RTC_MINUTES_ALARM	3
+#define RTC_HOURS		4
+#define RTC_HOURS_ALARM		5
+/* RTC_*_alarm is always true if 2 MSBs are set */
+# define RTC_ALARM_DONT_CARE 	0xC0
+
+#define RTC_DAY_OF_WEEK		6
+#define RTC_DAY_OF_MONTH	7
+#define RTC_MONTH		8
+#define RTC_YEAR		9
+
+/* control registers - Moto names
+ */
+#define RTC_REG_A		10
+#define RTC_REG_B		11
+#define RTC_REG_C		12
+#define RTC_REG_D		13
+
+/**********************************************************************
+ * register details
+ **********************************************************************/
+#define RTC_FREQ_SELECT	RTC_REG_A
+
+/* update-in-progress  - set to "1" 244 microsecs before RTC goes off the bus,
+ * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete,
+ * totalling to a max high interval of 2.228 ms.
+ */
+# define RTC_UIP		0x80
+# define RTC_DIV_CTL		0x70
+   /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */
+#  define RTC_REF_CLCK_4MHZ	0x00
+#  define RTC_REF_CLCK_1MHZ	0x10
+#  define RTC_REF_CLCK_32KHZ	0x20
+   /* 2 values for divider stage reset, others for "testing purposes only" */
+#  define RTC_DIV_RESET1	0x60
+#  define RTC_DIV_RESET2	0x70
+  /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
+# define RTC_RATE_SELECT 	0x0F
+
+/**********************************************************************/
+#define RTC_CONTROL	RTC_REG_B
+# define RTC_SET 0x80		/* disable updates for clock setting */
+# define RTC_PIE 0x40		/* periodic interrupt enable */
+# define RTC_AIE 0x20		/* alarm interrupt enable */
+# define RTC_UIE 0x10		/* update-finished interrupt enable */
+# define RTC_SQWE 0x08		/* enable square-wave output */
+# define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
+# define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
+# define RTC_DST_EN 0x01	/* auto switch DST - works f. USA only */
+
+/**********************************************************************/
+#define RTC_INTR_FLAGS	RTC_REG_C
+/* caution - cleared by read */
+# define RTC_IRQF 0x80		/* any of the following 3 is active */
+# define RTC_PF 0x40
+# define RTC_AF 0x20
+# define RTC_UF 0x10
+
+/**********************************************************************/
+#define RTC_VALID	RTC_REG_D
+# define RTC_VRT 0x80		/* valid RAM and time */
+/**********************************************************************/
+
+#ifndef ARCH_RTC_LOCATION	/* Override by <asm/mc146818rtc.h>? */
+
+#define RTC_IO_EXTENT	0x8
+#define RTC_IO_EXTENT_USED	0x2
+#define RTC_IOMAPPED	1	/* Default to I/O mapping. */
+
+#else
+#define RTC_IO_EXTENT_USED      RTC_IO_EXTENT
+#endif /* ARCH_RTC_LOCATION */
+
+#endif /* _MC146818RTC_H */