/* -*- Mode:C++; c-file-style:"gnu"; indent-tabs-mode:nil; -*- */
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
// Network topology
//
// +----------+
// | external |
// | Linux |
// | Host |
// | |
// | "mytap" |
// +----------+
// | n0 n3 n4
// | +--------+ +------------+ +------------+
// +-------| tap | | | | |
// | bridge | ... | | | |
// +--------+ +------------+ +------------+
// | Wifi | | Wifi | P2P |-----| P2P | CSMA |
// +--------+ +------+-----+ +-----+------+
// | | ^ |
// ((*)) ((*)) | |
// P2P 10.1.2 |
// ((*)) ((*)) | n5 n6 n7
// | | | | | |
// n1 n2 ================
// Wifi 10.1.1 CSMA LAN 10.1.3
//
// The Wifi device on node zero is: 10.1.1.1
// The Wifi device on node one is: 10.1.1.2
// The Wifi device on node two is: 10.1.1.3
// The Wifi device on node three is: 10.1.1.4
// The P2P device on node three is: 10.1.2.1
// The P2P device on node four is: 10.1.2.2
// The CSMA device on node four is: 10.1.3.1
// The CSMA device on node five is: 10.1.3.2
// The CSMA device on node six is: 10.1.3.3
// The CSMA device on node seven is: 10.1.3.4
//
// Some simple things to do:
//
// 1) Ping one of the simulated nodes on the left side of the topology.
//
// ./waf --run tap-wifi-dumbbell&
// ping 10.1.1.3
//
// 2) Configure a route in the linux host and ping once of the nodes on the
// right, across the point-to-point link. You will see relatively large
// delays due to CBR background traffic on the point-to-point (see next
// item).
//
// ./waf --run tap-wifi-dumbbell&
// sudo route add -net 10.1.3.0 netmask 255.255.255.0 dev thetap gw 10.1.1.2
// ping 10.1.3.4
//
// Take a look at the pcap traces and note that the timing reflects the
// addition of the significant delay and low bandwidth configured on the
// point-to-point link along with the high traffic.
//
// 3) Fiddle with the background CBR traffic across the point-to-point
// link and watch the ping timing change. The OnOffApplication "DataRate"
// attribute defaults to 500kb/s and the "PacketSize" Attribute defaults
// to 512. The point-to-point "DataRate" is set to 512kb/s in the script,
// so in the default case, the link is pretty full. This should be
// reflected in large delays seen by ping. You can crank down the CBR
// traffic data rate and watch the ping timing change dramatically.
//
// ./waf --run "tap-wifi-dumbbell --ns3::OnOffApplication::DataRate=100kb/s"&
// sudo route add -net 10.1.3.0 netmask 255.255.255.0 dev thetap gw 10.1.1.2
// ping 10.1.3.4
//
// 4) Try to run this in UseBridge mode. This allows you to bridge an ns-3
// simulation to an existing pre-configured bridge. This uses tap devices
// just for illustration, you can create your own bridge if you want.
//
// sudo tunctl -t mytap1
// sudo ifconfig mytap1 0.0.0.0 promisc up
// sudo tunctl -t mytap2
// sudo ifconfig mytap2 0.0.0.0 promisc up
// sudo brctl addbr mybridge
// sudo brctl addif mybridge mytap1
// sudo brctl addif mybridge mytap2
// sudo ifconfig mybridge 10.1.1.5 netmask 255.255.255.0 up
// ./waf --run "tap-wifi-dumbbell --mode=UseBridge --tapName=mytap2"&
// ping 10.1.1.3
#include <iostream>
#include <fstream>
#include "ns3/simulator-module.h"
#include "ns3/node-module.h"
#include "ns3/core-module.h"
#include "ns3/wifi-module.h"
#include "ns3/helper-module.h"
using namespace ns3;
NS_LOG_COMPONENT_DEFINE ("TapDumbbellExample");
int
main (int argc, char *argv[])
{
std::string mode = "ConfigureLocal";
std::string tapName = "thetap";
CommandLine cmd;
cmd.AddValue("mode", "Mode setting of TapBridge", mode);
cmd.AddValue("tapName", "Name of the OS tap device", tapName);
cmd.Parse (argc, argv);
GlobalValue::Bind ("SimulatorImplementationType", StringValue ("ns3::RealtimeSimulatorImpl"));
GlobalValue::Bind ("ChecksumEnabled", BooleanValue (true));
//
// The topology has a Wifi network of four nodes on the left side. We'll make
// node zero the AP and have the other three will be the STAs.
//
NodeContainer nodesLeft;
nodesLeft.Create (4);
YansWifiPhyHelper wifiPhy = YansWifiPhyHelper::Default ();
YansWifiChannelHelper wifiChannel = YansWifiChannelHelper::Default ();
wifiPhy.SetChannel (wifiChannel.Create ());
Ssid ssid = Ssid ("left");
WifiHelper wifi = WifiHelper::Default ();
NqosWifiMacHelper wifiMac = NqosWifiMacHelper::Default ();
wifi.SetRemoteStationManager ("ns3::ArfWifiManager");
wifiMac.SetType ("ns3::NqapWifiMac",
"Ssid", SsidValue (ssid),
"BeaconGeneration", BooleanValue (true),
"BeaconInterval", TimeValue (Seconds (2.5)));
NetDeviceContainer devicesLeft = wifi.Install (wifiPhy, wifiMac, nodesLeft.Get (0));
wifiMac.SetType ("ns3::NqstaWifiMac",
"Ssid", SsidValue (ssid),
"ActiveProbing", BooleanValue (false));
devicesLeft.Add (wifi.Install (wifiPhy, wifiMac, NodeContainer (nodesLeft.Get (1), nodesLeft.Get (2), nodesLeft.Get (3))));
MobilityHelper mobility;
mobility.Install (nodesLeft);
InternetStackHelper internetLeft;
internetLeft.Install (nodesLeft);
Ipv4AddressHelper ipv4Left;
ipv4Left.SetBase ("10.1.1.0", "255.255.255.0");
Ipv4InterfaceContainer interfacesLeft = ipv4Left.Assign (devicesLeft);
TapBridgeHelper tapBridge (interfacesLeft.GetAddress (1));
tapBridge.SetAttribute ("Mode", StringValue (mode));
tapBridge.SetAttribute ("DeviceName", StringValue (tapName));
tapBridge.Install (nodesLeft.Get (0), devicesLeft.Get (0));
//
// Now, create the right side.
//
NodeContainer nodesRight;
nodesRight.Create (4);
CsmaHelper csmaRight;
csmaRight.SetChannelAttribute ("DataRate", DataRateValue (5000000));
csmaRight.SetChannelAttribute ("Delay", TimeValue (MilliSeconds (2)));
NetDeviceContainer devicesRight = csmaRight.Install (nodesRight);
InternetStackHelper internetRight;
internetRight.Install (nodesRight);
Ipv4AddressHelper ipv4Right;
ipv4Right.SetBase ("10.1.3.0", "255.255.255.0");
Ipv4InterfaceContainer interfacesRight = ipv4Right.Assign (devicesRight);
//
// Stick in the point-to-point line between the sides.
//
PointToPointHelper p2p;
p2p.SetDeviceAttribute ("DataRate", StringValue ("512kbps"));
p2p.SetChannelAttribute ("Delay", StringValue ("10ms"));
NodeContainer nodes = NodeContainer (nodesLeft.Get(3), nodesRight.Get (0));
NetDeviceContainer devices = p2p.Install (nodes);
Ipv4AddressHelper ipv4;
ipv4.SetBase ("10.1.2.0", "255.255.255.192");
Ipv4InterfaceContainer interfaces = ipv4.Assign (devices);
//
// Simulate some CBR traffic over the point-to-point link
//
uint16_t port = 9; // Discard port (RFC 863)
OnOffHelper onoff ("ns3::UdpSocketFactory", InetSocketAddress (interfaces.GetAddress (1), port));
onoff.SetAttribute ("OnTime", RandomVariableValue (ConstantVariable (1)));
onoff.SetAttribute ("OffTime", RandomVariableValue (ConstantVariable (0)));
ApplicationContainer apps = onoff.Install (nodesLeft.Get (3));
apps.Start (Seconds (1.0));
// Create a packet sink to receive these packets
PacketSinkHelper sink ("ns3::UdpSocketFactory", InetSocketAddress (Ipv4Address::GetAny (), port));
apps = sink.Install (nodesRight.Get (0));
apps.Start (Seconds (1.0));
CsmaHelper::EnablePcapAll ("tap-wifi-dumbbell", false);
Ipv4GlobalRoutingHelper::PopulateRoutingTables ();
Simulator::Stop (Seconds (60.));
Simulator::Run ();
Simulator::Destroy ();
}