--- a/RELEASE_NOTES Wed Aug 11 09:25:51 2010 -0400
+++ b/RELEASE_NOTES Wed Aug 11 11:37:37 2010 -0400
@@ -83,6 +83,7 @@
- bug 843 - Most wifi examples change BeaconInterval to unrealistic values
- bug 844 - YansWifiPhy::GetPowerDbm off-by-one problem when calculating Tx
power
+ - bug 846 - packet.cc triggers deprecated warning
- bug 853 - Rates for Wi-Fi control responses are incorrectly selected
- bug 854 - Support DROP_QUEUE reason-code in Ipv4FlowProbe
- bug 858 - support MSG_PEEK in IPv4/IPv6 raw socket
@@ -93,7 +94,7 @@
- bug 873 - Queue occupancy counter not decremented in WifiMacQueue::Remove()
- bug 874 - wrong modulation type is selected in the forwardBurst method
- bug 875 - "frame includes FCS" flag should be set in Radiotap frame header
- - bug 875 - Set FCS included flag in Radiotap header
+ - bug 879 - source address selection for AODV using DeferredRouteRequest
- bug 881 - Reorganise to allow wider use of WifiInformationElement
- bug 890 - several rate adaptation algorithms not tested by test.py
- bug 900: RawTextConfigLoad::Default does not load configurations
@@ -113,8 +114,11 @@
wifi-remote-station-manager.h
- bug 923 - Inconsistent declaration of class/struct in mac-low.h
- bug 924 - Inconsistent declaration of class/struct in <xxx>-wifi-managers
+ - bug 925 - Various IPv6 cc files trigger deprecated warning
- bug 926 - olsr handling of multicast packets
- bug 927 - SimpleOfdmWimaxChannel RxPower computation
+ - bug 930 - examples/topology-read/topology-example-sim.cc uses variable
+ length array
- bug 931 - Abnormal exit reports SIGSEGV on failure
- bug 932 - Support IP_HDRINCL option for Ipv4RawSocket
- bug 933 - Flushing ostream and files on abnormal program exit
@@ -131,7 +135,7 @@
destination address to user callbacks
- bug 950 - PointToPointNetDevice says promisc support is not implemented
but it is
- - bug 953 - WiMAX channel scanning overflow
+ - bug 955 - Install NSC for NS3 in a Itanium Architecture (ia64) with Linux 2.6.16.6
- bug 956 - Bindings failure in core (traced-value) with older gcc
- bug 958 - WiFi uses wrong default values for MTU, FragmentationThreshold
and RtsCtsThreshold
--- a/src/contrib/energy/model/basic-energy-source.h Wed Aug 11 09:25:51 2010 -0400
+++ b/src/contrib/energy/model/basic-energy-source.h Wed Aug 11 11:37:37 2010 -0400
@@ -68,14 +68,14 @@
virtual double GetEnergyFraction (void);
/**
- * \param energy Amount of energy (in Joules) to decrease from energy source.
+ * \param energyJ Amount of energy (in Joules) to decrease from energy source.
*
* Implements DecreaseRemainingEnergy.
*/
virtual void DecreaseRemainingEnergy (double energyJ);
/**
- * \param energy Amount of energy (in Joules) to increase from energy source.
+ * \param energyJ Amount of energy (in Joules) to increase from energy source.
*
* Implements IncreaseRemainingEnergy.
*/
@@ -87,7 +87,7 @@
virtual void UpdateEnergySource (void);
/**
- * \param initialEnergy Initial energy, in Joules
+ * \param initialEnergyJ Initial energy, in Joules
*
* Sets initial energy stored in the energy source. Note that initial energy
* is assumed to be set before simulation starts and is set only once per
@@ -96,7 +96,7 @@
void SetInitialEnergy (double initialEnergyJ);
/**
- * \param supplyVoltage Supply voltage at the energy source, in Volts.
+ * \param supplyVoltageV Supply voltage at the energy source, in Volts.
*
* Sets supply voltage of the energy source.
*/
--- a/src/contrib/energy/model/energy-source.h Wed Aug 11 09:25:51 2010 -0400
+++ b/src/contrib/energy/model/energy-source.h Wed Aug 11 11:37:37 2010 -0400
@@ -97,7 +97,7 @@
virtual double GetEnergyFraction (void) = 0;
/**
- * \param energy Amount of energy to decrease (in Joules)
+ * \param energyJ Amount of energy to decrease (in Joules)
*
* This function decreases the remaining energy in the energy source by the
* specified amount. Provides linear interface for direct energy deduction.
@@ -105,7 +105,7 @@
virtual void DecreaseRemainingEnergy (double energyJ) = 0;
/**
- * \param energy Amount of energy to increase (in Joules)
+ * \param energyJ Amount of energy to increase (in Joules)
*
* This function increases the remaining energy in the energy source by the
* specified amount. Provides linear interface for direct energy increase.
@@ -136,7 +136,6 @@
/**
* \param deviceEnergyModelPtr Pointer to device energy model.
- * \param tid TypeId of the specific device energy model.
*
* This function appends a device energy model to the end of a list of
* DeviceEnergyModelInfo structs.